There are a lot of cases around, which ensures that there is an antm Produces very short age experiences. Studying antm, therefore, has been extremely difficult. But in recent years it has changed slightly, as the CERN has set up a facility that produces and caught the antimatter, which is allowed. Extensive studies Her SpecialtyIncluding The whole anti -atom.
Unfortunately, hardware used to occupy anti -proton also causes interference, which is limited to health, which can be measured. Therefore, the CERN decided that it would be nice to find out how to transfer the antimatter from where it was prepared. Since it was dealing with this problem, the CRN decided to make a shipping container for an anti -tatter, so that it would be put on the truck and possibly taken to the labs all over Europe.
Shipping container for an antm
The problem facing CERN comes from its own hardware. The anti -itat that is obtained is made by breaking a particle beam in the stationary target. As a result, all anti -particles coming out of the debris have a lot of energy. If you want to keep any of these, you have to slow down, which is done using electromagnetic fields that can work on charged antimators. Unfortunately, as the team behind the new work note, many measurements we want to do with the anti -“external magnetic field are extremely sensitive to noise.”
Recently. The hardware that slows down the antm is limited to the health you can measure.
The obvious solution is to transfer the antimatter from where it is developed. But it becomes very difficult. The Anti -Matter Cantonment Device has to be maintained as extremely vacuum and need super -conductor materials to prepare electromagnetic fields that prevent the antima from colliding with container walls. All of this means an important power supply, as well as with liquid helium cache to work with super conductor. A standard shipping container won’t just do.
So in the CERN, the team made a two -meter -long portable containment device. There is a junction at one end that allows it to plug in the beam of particles manufactured by existing convenience. This junction leads to the containment area, which is empty by a super conducting magnet. There are batteries on the device to ensure uninterrupted power supply, run all this as well as electronics. The entire setup is surrounded by a metal frame, which includes lifting points that can be used to connect to the crane for a rotation.